BVVVY - 39 CLEAR LACQUER

  • MSDS: BVVVY
  • Manufacturer: PLASTI KOTE CO INC
  • Product Name: 39 CLEAR LACQUER
  • National Stock Number: 8010-00N053842
Product Identification

Product ID:39 CLEAR LACQUER
MSDS Date:09/24/1987
FSC:8010
NIIN:00N053842
MSDS Number: BVVVY

Responsible Party
PLASTI-KOTE CO INC
1000 LAKE RD
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: 07778

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

186 @ 20C

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 26-33%

OSHA PEL 750 PPM; 1000 STEL

ACGIH TLV: 750 PPM; 1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETIC ACID, ETHYL ESTER; (ETHYL ACETATE) (SARA III) VP

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 5-10%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETIC ACID, ISOBUTYL ESTER; (ISOBUTYL ACETATE) (SARA III)

CAS: 110-19-0

RTECS: AI4025000

Fraction By Weight: 5-10%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


5.1 @ 20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM; 150 STEL

ACGIH TLV: 100 PPM; 150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA III) VP

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <5%

OSHA PEL 200 PPM; 300 STEL

ACGIH TLV: 200 PPM; 300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


3.3 @ 20C

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: <5%

OSHA PEL 400 PPM; 500 STEL

ACGIH TLV: 400 PPM; 500 STEL


0.9 @ 20C

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: <5%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: <5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM


1.7 @

CAS: 108-83-8

RTECS: MJ5775000

Fraction By Weight: <5%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM


PROPELLANT CONTAINING INGS 11-12

OSHA PEL N/K

ACGIH TLV: N/K


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 19%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT


NON-HAZARDOUS INGREDIENTS

Fraction By Weight: 9-14%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESSIVE INHAL OF VAPS
CAN CAUSE NASAL & RESPIRATORY IRRIT, DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, HEADACHE, POSSIBLE UNCON & EVEN ASPHYXIATION. EYES: CAN
CAUSE SEVERE IRRIT, REDNESS, TE ARING, BLURRED VISION. INGEST: CAN
CAUSE GI IRRIT, NAUSEA, VOMITING, DIARR. SKIN: CAN CAUSE IRRIT FOR
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SOME PERSONS. REPORTS HAVE ASSOC RPTD
& PRLNG OCCUP OVEREXP TO SOLVENTS W/PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE. SEVERE OVEREXP IN LAB ANIMALS HAS ALSO CAUSED LIVER
ABNORMALITIES & DAMAGE TO KIDNEYS, LUNGS & SPLEEN.
INTENTIONALMISUSE BY DELIB CONCENTRATING & INHALING CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF BRTHG DFCLT, ADMIN O*2. IF
BRTHG STOPPED, GIVE ARTF RESP & SEEK MED HELP. EYES:FLUSH W/WATER
FOR @ LEAST 15 MIN WHILE OCCAS HOLDING LIDS OPEN. GET MED ATTN.
INGEST:DO NOT INDUCE VOMIT(ASPIR OF MATL INTO LUNGS CAN CAUSE CHEM
PNEUM WHICH CAN BE FATAL). KEEP WARM, QUIET & GET MED ATTN/POIS CTL
CTR. SKIN:WASH W/SOAP & WATER/VARIOUS HAND CLEANERS. WASH CLTHG
BEFORE REUSE.

Fire Fighting

Flash Point:SUPDAT
Lower Limits:1%
Extinguishing Media:"ALCOHOL" FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILD-UP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE &/OR AUTOIGNITE
WHEN EXPOS TO EXTREME HEAT. VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/MAY BE MOVED BY VENT & IGNITED BY PILOT (SUPDAT)

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT OR OTHER
ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F OR IN
DIRECT SUNLIGHT OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
STORAGE OF NFPA CLASS 1C FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:CASUAL/OCCAS USE:TO AVOID BRTHG VAP/SPRAY MIST,
OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR ENTRY
DURING APPLICATN & DRYING. IF EYE WATER/HDCH/DIZZ EXPERIENCED, INCR
FRESH AIR, WEAR NIOSH /MSHA APPRVD RESP PROT/LEAVE THE AREA.
Ventilation:FOR REGULAR/CONTINUOUS USE: PROVIDE SUFFICIENT MECH (GEN)
&/OR LOCAL EXHAUST VENT TO MAINTAIN EXPOS BELOW TLVS.
Protective Gloves:CHEMICAL RESISTANT SUCH AS NEOPRENE.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
THE EXPERT ASSISTANCE OF AN INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT & BREATHING OF
VAPORS.
Supplemental Safety and Health
EVAP RATE:SLOWER THAN ETHER (PROPELLANT FASTER). FL PT:0F,-81C
(PROPELLANT: -100F,-73C). FIRE FIGHT PROC: AUTOIGNIT/EXPLOS WHEN
EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO
HAZ: LIGHTS, OTHER FLAMES, SPKS, HEATERS, SMKNG, ELEC MOTORS/OTHER
IGNIT SOURCES AT LOCATIONS DIST FROM MATL HNDLG POINT.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:>1500F,>816
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:<1 (H*2O=1)
Evaporation Rate & Reference:SUPDAT
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE/CARBON MONOXIDE, VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS,
ETC., WHEN BURNED.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.